RF•STOP™ SE DC Power Filter uses passive skin effect filtering technology for bi-directional low pass filtering of DC (positive and negative/ground wires). Attenuation performance is superior to traditional filter topologies.
RF•STOP™ SE is reflectionless: absorbing and terminating energy internally
RF•STOP™ SE has effectively zero resistance (impedance): no voltage attenuation
RF•STOP™ SE is bi-directional: RF noise is dissipated equally in both directions
Filter Performance:
STANDARD
1X (Single) filter performance
EXTREME
4X (Quadruple) filter performance
Select 2.1mm or 2.5mm connections for input and output. Use a well shielded DC power cable such as Gotham GAC-4/1 11301 UltraPro Star Quad. Avoid long cable runs to minimize EMF induced noise via antenna effects; ideally locate RF•STOP close to the component and use ultra-short cables (0.3 meter or 12 inches).
